Markforged Fiberglass CFF Spool 50cm3 3D filament
The Markforged 50cm3 Fiberglass CFF Spool is a high quality specialist 3D printing material for use with the Markforged range of 3D printers, at an affordable cost.Fibreglass filament provides a strength similar to Carbon Fibre, but with a lower stiffness (approx. 40% as stiff) and is only 2x the weight, as well as being electrically insulating.However, when compared to other materials which are available to reinforce composite materials such as Onyx, the flexural strength of fiberglass shows it to be leagues above the alternatives. Whilst PLA and ABS have the flexural strength equivalent to 75 MPa, Fiberglass can bend under forces without breaking until 215 MPa.Fibreglass is used with the CFF (Composite Filament Fabrication) nozzle to add reinforcing fibres to the Nylon or Onyx printed part.The Fiberglass CFF Spool is the perfect solution when printing parts that are required to be stiff yet still affordable. Examples of use cases include: functional prototypes, jigs, fixtures and end use parts.The Markforged Fiberglass CFF Spool is compatible with Mark One, Mark One Professional, Mark Two, Mark Two Professional, Mark Two Enterprise, Onyx Pro, Markforged X5 and Markforged X7 (formerly known as Mark X) models.
Markforged High Temp Fiberglass CFF Spool 150cm3 3D filament
High Strength High-Temperature Fiberglass CFF™ (Continuous Filament Fabrication) Spools. High Strength, High Temperature (HSHT) Fiberglass is a material uniquely designed for users who need strong parts in higher temperature environments (over 105°C, with a heat deflection point of 140°C). This capability is critical for the automotive and aerospace industries where load-bearing parts are continually expected to withstand higher temperatures. Possesses excellent durability Optimal for parts with repeated & sudden loading As stiff as fiberglass & more ductile HIgh impact resistance Bright yellow in color Compatible: Mark Two & X7
Markforged Fiberglass CFF Spool 150cm3 3D filament
Fiberglass gives you 5 times the strength of Onyx parts alone Strength like Carbon Fibre Use for a wide variety of strong, robust parts To print parts that are required to be stiff yet still affordable For Use on Onyx Pro, Mark Two, X5 and X7 Systems only. Not compatible with Onyx One or X3. 150cm3 Continuous Fiberglass Filament
Markforged High Temp Fiberglass CFF Spool 50cm3 3D filament
The 50cm3 Markforged High Temp Fiberglass CFF spool provides material with the highest impact resistance and highest heat deflection temperature of all of Markforged continuous fibres. Compared to alternative materials, the High Temp Fiberglass CFF spool shows a heat deflection temperature of 150° C, compared to 97° C in parts printed from ABS and 52° C in parts printed from PLA. For Use on Markforged Mark Two and X7 Systems Only. Not compatible with Onyx One, Onyx Pro, X3 or X5 Systems 50cm3 Continuous High Temperature Fiberglass Filament