B2B e-shop | All prices are without VAT | FOR UE CUSTOMER CHECK YOUR VAT HERE

3D Systems

ProJet 2500 Build Platform - 3D Systems

SKU 310054-02

The item has been added to your cart

Go to cart

You have reached the maximum quantity that can be added to the cart

Go to cart

Build Platform for ProJet 2500 wax 3D printers.

The build plate should be cleaned prior to re-inserting it into the printer.

  1. Carefully use a sharp putty knife or single-edge, metal razor blade scraper (held at a 30 degree angle to the surface) to scrape any excess material from the build plate.  When using a razor blade scraper, be sure the blade is new and still sharp; do not use a dull or nicked blade.
NOTE: NOTE: A standard tray for a paint roller can be used to collect the scrapings from the build plate.
Scrape any excess support off the platform
 
  1. Spray the platform with Isopropyl alcohol (IPA) and wipe with paper towels.  Alternatively, one can use the disposable IPA wipes to clean the plate.  Do not reuse the wipes.  Heating the plate briefly can aid in complete support removal.
Wipe the plate with IPA
 
  1. Always clean both sides of the build plate.